MC industrial reducer is designed specifically for high torque working conditions, suitable for operation under high-power and heavy-duty working conditions. It is modular in design, with high load-bearing capacity, long service life, and low noise characteristics. It can be equipped with single axis or dual axis input and output, with a simple structure. Additional modules such as fans, forced lubrication, and temperature detection can be configured according to user requirements. Non standard design can also be carried out according to user needs. Widely used in industries such as coal, ports, metallurgy, alumina, electricity, building materials, mining, lifting, environmental protection, chemical industry, light industry, papermaking, etc.

The machine base numbers of MC series industrial reducers are 02~09, equivalent to HB series 4~12. The corresponding M and ML series correspond to HB series 13~26. In the face of market diversification, our company's series can directly replace imported products of the same model.

Performance characteristics:

1. The MC series industrial reducer is designed based on the principles of economy and functionality, and features high power and compact mechanism;

2. The product adopts a modular hard tooth surface single unit structure design, a universal installation form, a medium torque range, high performance, and high reliability;

3. The optimization and module combination design of reducer products, advanced production processes, and detailed material planning enable the reducer products to have higher power at unit cost, ensuring high torque transmission;

4. The square box can withstand heavy loads;

5. The combination of excellent sealing arrangement and structure results in long bearing life;

6. Available in horizontal, vertical, and vertical installation forms;

7. Can be equipped with backstop and overrunning clutch according to customer requirements. Combined with R and K series reducers, a larger speed ratio can be achieved, and mechanical speed regulation can be achieved with MB inorganic gearbox.

8. The MC series compact gearbox is designed specifically for the medium torque range, ensuring that the gearbox can perform application tasks excellently. Widely used in conveyor systems in the building materials, chemical, power, metallurgical, food, and feed industries; Transportation and traffic field; Wood, paper, and environmental industries.

Technical parameters:

Speed ratio range 7.1~112

*High output torque: 65kNm

*High input power: 1000kW

基本型号：

MC2P..SF..  MC2P..HF..  MC2R..SF..  MC2R..HF..

MC3P..SF..  MC3P..HF..  MC3R..SF..  MC3R..HF..

机座号：02~09

产品描述

MC模块化硬齿面减速机

说  明：MC模块化硬齿面减速机采用降噪箱体设计，较大的箱体表面积和大风扇，圆柱齿轮和螺旋锥齿轮均采用先进的磨齿工艺，使整机可靠性得到提高，传递功率增大。是中等扭矩负荷的*佳选择

MC模块化硬齿面减速机

主 要 型 号： 

MC2PLST02 MC2PLST03 MC2PLST04 MC2PLST05 MC2PLST06 MC2PLST07 MC2PLST08 MC2PLST09

MC2PLHF02 MC2PLHF03 MC2PLHF04 MC2PLHF05 MC2PLHF06 MC2PLHF07 MC2PLHF08 MC2PLHF09

MC2PLHT02 MC2PLHT03 MC2PLHT04 MC2PLHT05 MC2PLHT06 MC2PLHT07 MC2PLHT08 MC2PLHT09

MC2PLHSF02 MC2PLHSF03 MC2PLHSF04 MC2PLHSF05 MC2PLHSF06 MC2PLHSF07 MC2PLHSF08 MC2PLHSF09

MC2PLHST02 MC2PLHST03 MC2PLHST04 MC2PLHST05 MC2PLHST06 MC2PLHST07 MC2PLHST08 MC2PLHST09

减速比范围：MC模块化硬齿面减速机MC2P公称速比：7.1  8  9  10  11.2  12.5  14  16  18  20；MC模块化硬齿面减速机MC3P公称速比：22.5 25 28 31.5 35.5 40 45 50 56 63 71 80 90 100 112；MC模块化硬齿面减速机MC2R公称速比：7.1  8  9  10  11.2  12.5  14  16  18  20；MC模块化硬齿面减速机MC3R公称速比：14 16 18 2022.5 25 28 31.5 35.5 40 45 50 56 63 71 80 90 100 112.

结构形式：MC2P /MC3P: PL-水平安装 PV-垂直安装 PE-竖立安装； S – 实心轴 F – 底角 H – 空心轴 T – 力矩支臂；MC2R /MC3R: RL-水平安装 RV-垂直安装 RE-竖立安装；S – 实心轴 F – 底角 H – 空心轴 T – 力矩支臂

注意事项
一、减速机采用460#中负荷工业齿轮油，工作环境温度为0~40℃。
二、首次使用100小时后，应洗干净内腔换上新的齿轮油，以后每2000小时换油一次。
三、拆装减速机时，应尽量避免锤击，以免损坏正常机件。
四、使用时若发现轴伸或连接处有渗油现象，应及时更换骨架油封等密封件。

售前服务

1、公司帮助用户选型，确定型号，以及相关技术疑问解答。

2、为用户提供减速机基本使用知识，包括减速机的使用与维修，减速机的装配、不同型号产品使用特性等技术问题，凡用户需要提供服务的，公司将派出*好的工程技术人员为客户服务。

售中服务

1、凡公司用户，公司均要为其制作用户服务档案。询问货到验收情况，包括产品质量是否能满足客户需要，运输方式、包装情况及客户的其它要求。

2、新开发的产品，向用户介绍新产品，并协助用户安装，介绍使用方法及技术要求。

售后服务

用户使用华东减速机出现质量问题时，接到客户投诉电话会快速给出答复。为了满足客户的需求,华东减速机公司有上百种非标产品,几十项已经获得了国家专利产品,对客户需求的量大产品,提供现货供应,型号齐全,备货充足！

另附M系列主要型号和图片如下：

M3PSF50 M3PSF60 M3PSF70 M3PSF80 M3PSF90 M4PSF50 M4PSF60 M4PSF70 M4PSF80 M4PSF90 M5PSF60 M5PSF70 M5PSF80 M5PSF90 M3PHF50 M3PHF60 M3PHF70 M3PHF80 M3PHF90 M4PHF60 M4PHF70 M4PHF80 M4PHF90 M5PHF50 M5PHF60 M5PHF70 M5PHF80 M5PHF90  M3PHT50 M3PHT60 M3PHT70 M3PHT80 M3PHT90 M4PHT50 M4PHT60 M4PHT70 M4PHT80 M4PHT90 M5PHT50 M5PHT60 M5PHT70 M5PHT80 M5PHT90  M3PVSF50 M3PVSF60 M3PVSF70 M3PVSF80 M3PVSF90 M4PVSF50 M4PVSF60 M4PVSF70 M4PVSF80 M4PVSF90 M5PVSF50 M5PVSF60 M5PVSF70 M5PVSF80 M5PVSF90   M3PST50 M3PST60 M3PST70 M3PST80 M3PST90 M4PST50 M4PST60 M4PST70 M4PST80 M4PST90 M3RSF50 M3RSF60 M3RSF70 M3RSF80 M3RSF90 M3RSF50 M3RSF60 M3RSF70 M3RSF80 M3RSF90 M5RSF60 M5RSF70 M5RSF80 M5RSF90 M3RHF50 M3RHF60 M3RHF70 M3RHF80 M3RHF90 M3RHF60 M3RHF70 M3RHF80 M3RHF90 M5RHF50 M5RHF60 M5RHF70 M5RHF80 M5RHF90  M3RHT50 M3RHT60 M3RHT70 M3RHT80 M3RHT90 M3RHT50 M3RHT60 M3RHT70 M3RHT80 M3RHT90 M5RHT50 M5RHT60 M5RHT70 M5RHT80 M5RHT90  M3RVSF50 M3RVSF60 M3RVSF70 M3RVSF80 M3RVSF90 M3RVSF50 M3RVSF60 M3RVSF70 M3RVSF80 M3RVSF90 M5RVSF50 M5RVSF60 M5RVSF70 M5RVSF80 M5RVSF90   M3RST50 M3RST60 M3RST70 M3RST80 M3RST90 M3RST50 M3RST60 M3RST70 M3RST80 M3RST90